BlueRailDCC For Model Railroaders

Posted on by DeadRailer

2 Ways to control your train with BlueRailDCC:

Use BlueRailDCC to control any DCC decoder

  • iPad/iPhone control
  • Works with any DCC decoder
  • Trigger 28 functions
  • Edit and Read all CVs

Use BlueRailDCC to control loco directly (motor/lights) basic mode

  • iPad/iPhone control
  • Control of motor and lights
  • no sound affordable solution
  • no decoder required
  • Adjustable accel/decel

ScrollDownToBuyNow

Benefits

  • Very compact form factor
  • Use any power source of your choice (AC/DC, DCC or battery)
  • Control your loco from 75-150 indoors/outdoors
  • No additional equipment or complex setup issues
  • Easy to install, full featured, Easy to Use
  • Available for Large Scale (5amp) or smaller scales (2amp)
  • Control multiple locos with one device (iPhone/iPad)
  • Built in consisting and speed matching
Boards_2AMP Boards_5AMP

2 antenna options available:

  • Integrated antenna (`75 feet range)
  • External u.FL antenna (`150 feet range)

Install Diagrams:

Buy2AmpBoards

Buy this board if your current draw is less than 2 amps and you want 75′ range. Suitable for most N, HO and On30 Scale locos (as well as DC or battery powered O locos).

Cart_2-AmpBoard 2 Amp BlueRailDCC board w/ integrated antenna
2 AMP max / 1.5 AMP continuous
$95.00



IF USING AC TRACK POWER – SCROLL DOWN

Buy this board if your current draw is less than 2 amps and you want 150′ range. Suitable for most N, HO and On30 Scale locos (as well as DC or battery powered O locos).

SmallBoard_External_Cart_01 2 Amp BlueRailDCC board w/ u.fl antenna
2 AMP max / 1.5 AMP continuous
$105.00

2 AMP AC TRACK POWER BOARDS BELOW:

Buy this board if your current draw is less than 2 amps and you want 75′ range and you plan to power your loco with AC track power. Suitable for most O gauge and S scale locos.

Cart_2-AmpBoard 2 Amp BlueRailDCC board w/ integrated antenna
AC Power Option
2 AMP max / 1.5 AMP continuous
$105.00

Buy this board if your current draw is less than 2 amps and you want 150′ range and you plan to power your loco with AC track power. Suitable for most O gauge and S scale locos.

SmallBoard_External_Cart_01 2 Amp BlueRailDCC board w/ u.fl antenna
AC Power Option
2 AMP max / 1.5 AMP continuous
$115.00

Buy5AmpBoards2

Buy this board if your current draw is 2-5 amps and you want 75′ range. Suitable for G and large O gauge locos. Works with AC, DC, DCC or battery power

Cart_5-AmpBoard 5 Amp BlueRailDCC board w/ integrated antenna
5 AMP max / 3 AMP continuous
$140.00

Buy this board if your current draw is 2-5 amps and you want 150′ range. Suitable for G and large O gauge locos. Ideal for outdoor use. Works with AC, DC, DCC or battery power

LargeBoard_External_Cart 5 Amp BlueRailDCC board w/ u.fl antenna
5 AMP max / 3 AMP continuous
$150.00

BuyBatteries

soundtraxx_header_150B

Soundtraxx Decoders
Tsu-1100 (1 amp)

Decoder Sounds

TSU-2200 (2 amp)

Decoder Sounds

TSU-4400 (4 amp)

Decoder Sounds

soundtraxx_header_150B

Mini Cube Speakers (2 sizes)

Mini Cube Speakers

Dead Rail Kits – battery ( plus REED-SWITCH & CONNECTIONS )

Battery-PicDead Rail Kits are designed for the person that wants to install their own Dead Rail System. Kits Consist of the following.

Basic Kit- Soldering required

  • All Kits include:
  • Battery of your choice and
  • Shrink Red & Black 3”
  • Kapton tape 4”
  • Charge Cable 1
  • Loco connector (s) 2
  • On/Off switch With a Magnetic Reed Switch 1
  • 28AWG Silicone Wire Red & Black 6” each

 

  • Kit #1 $75.00
  • 11.1Volt 250ma Lithium Polymer Battery with Connector
    • This is a high quality battery pack with protection control modules. (PCM)
    • PCM protects against low voltage, over charge, short circuits.
  • Battery Dimensions are: In mm 31 X 21 X 18 tall. In inches 1.22 X .8 X .7 tall
  • Kit #2 $75.00
  • 11.1Volt 450ma Lithium Polymer Battery with Connector
    • This is a high quality battery pack with protection control modules. (PCM)
    • PCM protects against low voltage, over charge, short circuits.
  • Battery dimensions are: In mm 46 X 23 X 18 tall. In inches 1.81 X .95 X .71
  • Kit #3 $75.00
  • 11.1Volt 500ma Lithium Polymer Battery with Connector
    • This is a high quality battery pack with protection control modules. (PCM)
    • PCM protects against low voltage, over charge, short circuits.
  • Battery dimensions are: In mm 40 X 27 X 18. In inches 1.6 X 1.1 X .71
  • Kit #4 $75.00
  • 11.1Volt 850ma Lithium Polymer Battery with Connector
    • This is a high quality battery pack with protection control modules. (PCM)
    • PCM protects against low voltage, over charge, short circuits.
  • Battery dimensions are: In mm 52 X 31 X 18. In inches 2.1 X 1.22 X .71
charger Imax B6AC+ Battery Charger $45.00

Charge Cable with Banana Plugs $12.00

Magnetic Wand. Soundtraxx IC Wand TUC810141 $7.95

On/Off Switch with Magnetic Reed Switch $12.00

Customer needs soldering skills to connect the parts.

Extra batteries are available.

Customer needs to supply:

  • Soldering Station
  • Tools

The BlueRail Trains app will update on your smartdevice. Please turn on “automatic updates” on your iOS device or check for updates regularly.