Dead Rail Soundtraxx Installation Kits

Dead Rail Kits are designed for the person that wants to install their own Dead Rail System.  Soldering skills required.
Dead Rail Kits come with the following:

  • Disc
  • Soundtraxx ECO 100 or TSU-1100 or TSU Decoder of your choice
  • 11.1Volt Lithium Polymer Battery with Connector
  • This is a high quality battery pack with protection control modules. (PCM)
  • PCM protects against low voltage, over charge, short circuits.
  • Speaker with Baffel
  • Shrink  Red & Black 3"
  • Kapton tape 4"
  • Charge Cable with battery connector  1
  • Loco connector (s) 2
  • On/Off switch with magnetic reed switch 1
  • 28AWG Silicone Wire Red & Black 6" each
  • On/Off wiring diagram
  • Instruction Sheet
  • Choice of battery
PRICE:  Econami Version - $152      Tsunami2 Version - $182

Choose a Battery

  
 
  • 11.1 volt 250 mA protected lithium polymer battery
  • Battery Dimensions are 31mm X 21mm X 18 mm thick. 1.22" X 0.8" X 0.7" Thick

  
 
  • 11.1 volt 450 mA protected lithium polymer battery
  • Battery Dimensions are 46mm X 23mm X 18mm. 1.81" X 0.95" X 0.71" Thick

  
 
  • 11.1 volt 500 mA protected lithium polymer battery
  • Battery Dimensions are 39mm X 26mm X 20mm. 1.6" X 1.1" X 0.76" Thick


Your kit includes a Soundtraxx Decoder. Please select a decoder below:


Choose a SoundTraxx Decoder:

 

1 AMP DECODERS

  
  Econami Eco-100     Part #        Price
881001 (included)    
882001 (included)
 
  Tsunami 2 TSU-1100        
884001 (included)
885001 (included)
885004 (included)
 
 

2 AMP DECODERS

  
  Tsunami 2        
884002 (included)
885005 (included)
885007 (included)
885008 (included)
 

The above decoders are stock items. Other Econami and Tsunami Decoders are available by request.

It is the customer’s responsibility to determine the correct 1 amp or 2 amp decoders and the correct sounds.

Product specifications are at: http://www.soundtraxx.com/products.php




Your kit includes a Soundtraxx Speaker. Please select a speaker below:


Choose a SoundTraxx Speaker:

  Speaker     Part #        Price
810154 (included)    
810155 (included)
810054 (included)
 


Below are extra items (not included in the kit) that you may need:

You must have a receiver for the system to work.


Choose a CVP MINI AIRWIRE Receiver:

  Receiver     Part #        Price
- -    
B15D $89
B15DX     $95
 

Choose a Tam Valley Component:

  Component     Part #        Price
DRS1-R $55.95
DRS1-T     $55.95
 

* If you do not have a Tam Valley Transmitter, you will need one per layout.


Extras:

     

Customer needs to supply:
  • Battery Charger
  • Soldering Station
  • Tools
Customer needs soldering skills to connect the parts.
Extra batteries are available. Individual components are not sold separately.

Your Name*:
Email*:
Location: